Jan K. van Dalen
|
| Posted: 08/21/2001, 2:31 PM |
|
Hi Everyone,
I'm developing together with other 2 programmers located in different
locations. At this point we have one .ccs file. I'll like to send &
receive pages as needed.
How is everyone doing this?, I see the import option but don't see and
export option.
|
|
|
 |
Don Oldenburg
|
| Posted: 08/21/2001, 2:52 PM |
|
I don't believe there is an export.. it would be their entire CCS file... or
a copy that they went in and deleted the unwanted pages...
"Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
news:9lujva$gvk$1@news.codecharge.com...
> Hi Everyone,
>
> I'm developing together with other 2 programmers located in different
> locations. At this point we have one .ccs file. I'll like to send &
> receive pages as needed.
>
> How is everyone doing this?, I see the import option but don't see and
> export option.
>
>
|
|
|
|
Jan K. van Dalen
|
| Posted: 08/21/2001, 2:56 PM |
|
I was afraid of this<g>.
"Don Oldenburg" <don.oldenburg@cacmnet.com> wrote in message
news:9lul6j$irt$1@news.codecharge.com...
> I don't believe there is an export.. it would be their entire CCS file...
or
> a copy that they went in and deleted the unwanted pages...
>
> "Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
>news:9lujva$gvk$1@news.codecharge.com...
> > Hi Everyone,
> >
> > I'm developing together with other 2 programmers located in different
> > locations. At this point we have one .ccs file. I'll like to send &
> > receive pages as needed.
> >
> > How is everyone doing this?, I see the import option but don't see and
> > export option.
> >
> >
>
>
|
|
|
|
Jason Charette
|
| Posted: 08/21/2001, 5:30 PM |
|
Correct sir.
As far as I know, you can only import a .ccs file - in it's entirety.
The problem you'll run into is that only one person can work on the file at
any given time, and then you have to get theirs, and replace yours... Big
pain.
If you already have everyone's tasks figured out, have everyone create their
own .ccs file, and import those periodically, or at project completion. The
only catch here, is you lose (or at least you used to lose) any links
assigned via "form" dropdown in properties.
I suppose you could use something that would merge all the changes, like
CVS....
Good luck!
Jason
"Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
news:9lulf1$j75$1@news.codecharge.com...
> I was afraid of this<g>.
>
> "Don Oldenburg" <don.oldenburg@cacmnet.com> wrote in message
>news:9lul6j$irt$1@news.codecharge.com...
> > I don't believe there is an export.. it would be their entire CCS
file...
> or
> > a copy that they went in and deleted the unwanted pages...
> >
> > "Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
> >news:9lujva$gvk$1@news.codecharge.com...
> > > Hi Everyone,
> > >
> > > I'm developing together with other 2 programmers located in different
> > > locations. At this point we have one .ccs file. I'll like to send &
> > > receive pages as needed.
> > >
> > > How is everyone doing this?, I see the import option but don't see
and
> > > export option.
> > >
> > >
> >
> >
>
>
|
|
|
|
CodeCharge
|
| Posted: 08/21/2001, 5:47 PM |
|
Page export functionality is not needed because once you select "Import",
you can select pages that you like to import from another .ccs file.
However, we do sometimes split work by module, for example one person can
work on .ccs for Administration, another for the User frontend.
Adam
"Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
news:9lujva$gvk$1@news.codecharge.com...
> Hi Everyone,
>
> I'm developing together with other 2 programmers located in different
> locations. At this point we have one .ccs file. I'll like to send &
> receive pages as needed.
>
> How is everyone doing this?, I see the import option but don't see and
> export option.
>
>
|
|
|
|
Jason Charette
|
| Posted: 08/21/2001, 5:55 PM |
|
Damn Adam. You're right about the import thing, of course...
Even if you select the different pages to import, is the problem with losing
links still present?
J.
"CodeCharge" <support@codecharge.com> wrote in message
news:9luvfk$5c1$1@news.codecharge.com...
> Page export functionality is not needed because once you select "Import",
> you can select pages that you like to import from another .ccs file.
> However, we do sometimes split work by module, for example one person can
> work on .ccs for Administration, another for the User frontend.
>
> Adam
>
> "Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
>news:9lujva$gvk$1@news.codecharge.com...
> > Hi Everyone,
> >
> > I'm developing together with other 2 programmers located in different
> > locations. At this point we have one .ccs file. I'll like to send &
> > receive pages as needed.
> >
> > How is everyone doing this?, I see the import option but don't see and
> > export option.
> >
> >
>
>
|
|
|
|
Jan K. van Dalen
|
| Posted: 08/22/2001, 8:37 AM |
|
I Adam,
I just tested the import and it works great but ... It would be much better
if you could "overwrite" and existing procedure. When I imported an
existing page it created another page with the same name.
"CodeCharge" <support@codecharge.com> wrote in message
news:9luvfk$5c1$1@news.codecharge.com...
> Page export functionality is not needed because once you select "Import",
> you can select pages that you like to import from another .ccs file.
> However, we do sometimes split work by module, for example one person can
> work on .ccs for Administration, another for the User frontend.
>
> Adam
>
> "Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
>news:9lujva$gvk$1@news.codecharge.com...
> > Hi Everyone,
> >
> > I'm developing together with other 2 programmers located in different
> > locations. At this point we have one .ccs file. I'll like to send &
> > receive pages as needed.
> >
> > How is everyone doing this?, I see the import option but don't see and
> > export option.
> >
> >
>
>
|
|
|
|
CodeCharge
|
| Posted: 08/22/2001, 11:42 AM |
|
Well, I'm not sure if this is a good thing or bad thing :)
I guess this would require an option, which we will consider adding. For
now, you may need to manually delete previous page before or after importing
new one.
Adam
"Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
news:9m0jk4$5mj$1@news.codecharge.com...
> I Adam,
>
> I just tested the import and it works great but ... It would be much
better
> if you could "overwrite" and existing procedure. When I imported an
> existing page it created another page with the same name.
>
> "CodeCharge" <support@codecharge.com> wrote in message
>news:9luvfk$5c1$1@news.codecharge.com...
> > Page export functionality is not needed because once you select
"Import",
> > you can select pages that you like to import from another .ccs file.
> > However, we do sometimes split work by module, for example one person
can
> > work on .ccs for Administration, another for the User frontend.
> >
> > Adam
> >
> > "Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
> >news:9lujva$gvk$1@news.codecharge.com...
> > > Hi Everyone,
> > >
> > > I'm developing together with other 2 programmers located in different
> > > locations. At this point we have one .ccs file. I'll like to send &
> > > receive pages as needed.
> > >
> > > How is everyone doing this?, I see the import option but don't see
and
> > > export option.
> > >
> > >
> >
> >
>
>
|
|
|
|
CodeCharge
|
| Posted: 08/22/2001, 11:44 AM |
|
The problem with lost links occures because we do not use page names, but
rather page pointers, which is similar to user_id instead of user_name.
That way when you work with CC and change page name, you don't loose all
other links pointing to that page.
But as you see, this reflects negatively on the import routine. We'll look
closer into this issue.
"Jason Charette" <jasoncharette@hotmail.com> wrote in message
news:9luvuf$642$1@news.codecharge.com...
> Damn Adam. You're right about the import thing, of course...
>
> Even if you select the different pages to import, is the problem with
losing
> links still present?
>
> J.
>
>
> "CodeCharge" <support@codecharge.com> wrote in message
>news:9luvfk$5c1$1@news.codecharge.com...
> > Page export functionality is not needed because once you select
"Import",
> > you can select pages that you like to import from another .ccs file.
> > However, we do sometimes split work by module, for example one person
can
> > work on .ccs for Administration, another for the User frontend.
> >
> > Adam
> >
> > "Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
> >news:9lujva$gvk$1@news.codecharge.com...
> > > Hi Everyone,
> > >
> > > I'm developing together with other 2 programmers located in different
> > > locations. At this point we have one .ccs file. I'll like to send &
> > > receive pages as needed.
> > >
> > > How is everyone doing this?, I see the import option but don't see
and
> > > export option.
> > >
> > >
> >
> >
>
>
|
|
|
|
Jason Charette
|
| Posted: 08/22/2001, 11:48 AM |
|
Exactly what I thought... It's the method that makes most sense. It's just a
minor pain when working on large projects... :)
J.
"CodeCharge" <support@codecharge.com> wrote in message
news:9m0uir$psh$1@news.codecharge.com...
> The problem with lost links occures because we do not use page names, but
> rather page pointers, which is similar to user_id instead of user_name.
> That way when you work with CC and change page name, you don't loose all
> other links pointing to that page.
> But as you see, this reflects negatively on the import routine. We'll look
> closer into this issue.
>
>
> "Jason Charette" <jasoncharette@hotmail.com> wrote in message
>news:9luvuf$642$1@news.codecharge.com...
> > Damn Adam. You're right about the import thing, of course...
> >
> > Even if you select the different pages to import, is the problem with
> losing
> > links still present?
> >
> > J.
> >
> >
> > "CodeCharge" <support@codecharge.com> wrote in message
> >news:9luvfk$5c1$1@news.codecharge.com...
> > > Page export functionality is not needed because once you select
> "Import",
> > > you can select pages that you like to import from another .ccs file.
> > > However, we do sometimes split work by module, for example one person
> can
> > > work on .ccs for Administration, another for the User frontend.
> > >
> > > Adam
> > >
> > > "Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
> > >news:9lujva$gvk$1@news.codecharge.com...
> > > > Hi Everyone,
> > > >
> > > > I'm developing together with other 2 programmers located in
different
> > > > locations. At this point we have one .ccs file. I'll like to send
&
> > > > receive pages as needed.
> > > >
> > > > How is everyone doing this?, I see the import option but don't see
> and
> > > > export option.
> > > >
> > > >
> > >
> > >
> >
> >
>
>
|
|
|
|
Jan K. van Dalen
|
| Posted: 08/22/2001, 2:14 PM |
|
As you know already, importing causes a problem with links. When importing,
a prompt asking to "overwrite or append" will be great when pages have the
same name. And somehow keep the links.
This could enhance CC when it comes to multiple developers.
"CodeCharge" <support@codecharge.com> wrote in message
news:9m0udp$pi1$1@news.codecharge.com...
> Well, I'm not sure if this is a good thing or bad thing :)
> I guess this would require an option, which we will consider adding. For
> now, you may need to manually delete previous page before or after
importing
> new one.
>
> Adam
>
>
> "Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
>news:9m0jk4$5mj$1@news.codecharge.com...
> > I Adam,
> >
> > I just tested the import and it works great but ... It would be much
> better
> > if you could "overwrite" and existing procedure. When I imported an
> > existing page it created another page with the same name.
> >
> > "CodeCharge" <support@codecharge.com> wrote in message
> >news:9luvfk$5c1$1@news.codecharge.com...
> > > Page export functionality is not needed because once you select
> "Import",
> > > you can select pages that you like to import from another .ccs file.
> > > However, we do sometimes split work by module, for example one person
> can
> > > work on .ccs for Administration, another for the User frontend.
> > >
> > > Adam
> > >
> > > "Jan K. van Dalen" <vandalen@mindspring.com> wrote in message
> > >news:9lujva$gvk$1@news.codecharge.com...
> > > > Hi Everyone,
> > > >
> > > > I'm developing together with other 2 programmers located in
different
> > > > locations. At this point we have one .ccs file. I'll like to send
&
> > > > receive pages as needed.
> > > >
> > > > How is everyone doing this?, I see the import option but don't see
> and
> > > > export option.
> > > >
> > > >
> > >
> > >
> >
> >
>
>
|
|
|
|
|
